Signal Matrix tool - Arc protection - Bay control and measurement - Motor protection - Transformer protection - 2 winding - Busbar differential protection (low impedance) - Feeder protection - Voltage regulation - Busbar protection (voltage and frequency) - Capacitor bank protection - Interconnection protection - Power management/Load shedding - Back-up protection - Engineering Manual - SSC600 Smart substation control and protection - 1.5 - IEC - ANSI - 17.04.2023

SSC600 and SSC600 SW Engineering Manual

The Signal Matrix tool is used to make cross-references for the GOOSE signal input engineering.

Note: The Application Configuration tool is used for adding or removing function blocks, for example, GOOSE receiving function blocks.

Figure 1. Signal Matrix: operation principles

Glue logic means inserting a logical gate (OR and AND blocks) between the function blocks and the binary output channel. This can be engineered with the Signal Matrix tool.

Note: Connections made with the Signal Matrix tool are automatically also shown in the Application Configuration tool.

Figure 2. Signal Matrix: a connection between binary input channels to binary input signals