Safety information - Arc protection - Bay control and measurement - Motor protection - Transformer protection - 2 winding - Busbar differential protection (low impedance) - Feeder protection - Voltage regulation - Busbar protection (voltage and frequency) - Capacitor bank protection - Interconnection protection - Power management/Load shedding - Back-up protection - Engineering Manual - SSC600 Smart substation control and protection - 1.5 - IEC - ANSI - 17.04.2023

SSC600 and SSC600 SW Engineering Manual

Warning: Dangerous voltages can occur on the connectors, even though the auxiliary voltage has been disconnected.
Warning: Non-observance can result in death, personal injury or substantial property damage.
Warning: Only a competent electrician is allowed to carry out the electrical installation.
Warning: National and local electrical safety regulations must always be followed.
Warning: The frame of the device has to be carefully earthed.
CAUTION: The device contains components which are sensitive to electrostatic discharge. Unnecessary touching of electronic components must therefore be avoided.
CAUTION: Whenever changes are made in the device, measures should be taken to avoid inadvertent tripping.