License management - Arc protection - Bay control and measurement - Motor protection - Transformer protection - 2 winding - Busbar differential protection (low impedance) - Feeder protection - Voltage regulation - Busbar protection (voltage and frequency) - Capacitor bank protection - Interconnection protection - Power management/Load shedding - Back-up protection - Engineering Manual - SSC600 Smart substation control and protection - 1.5 - IEC - ANSI - 18.12.2024

SSC600 and SSC600 SW Engineering Manual
  1. In the Plant Structure view, right-click the device and select SSC600 Device Management.
    Figure 1. Selecting SSC600 Device Management

  2. Select License management and click Next.
    Figure 2. Selecting License management

  3. Click Next.
    Figure 3. Configuration mode for the license upgrade operation

  4. Click Next in Order code selection window.
    Figure 4. Order code selection window
  5. Summary window tells if application changes are needed. If changes are needed, follow instructions. If changes are not needed, click Finish.
    Figure 5. Summary window