Creating a new project - Arc protection - Bay control and measurement - Motor protection - Transformer protection - 2 winding - Busbar differential protection (low impedance) - Feeder protection - Voltage regulation - Busbar protection (voltage and frequency) - Capacitor bank protection - Interconnection protection - Power management/Load shedding - Back-up protection - Engineering Manual - SSC600 Smart substation control and protection - 1.5 - IEC - ANSI

SSC600 and SSC600 SW Engineering Manual
  1. Start PCM600
  2. To see the projects that are currently available in the PCM databases, select File/ Open/Manage Project on the menu bar.
    The Open/Manage Project window is displayed.
  3. Click Projects on my computer.
  4. Click New Project.
  5. If there are currently projects or object tools open, a confirmation dialog box opens.
    Click Yes to close the open projects. A Create New Project dialog box opens.
    Figure 1. New Project dialog box
    Figure 2. Creating a new project
  6. In the Project Name box, give a name for the project.
    Note: The project name must be unique.
  7. Optionally, write a description of the project in the Description box.
  8. Click Create.
PCM600 sets up a new project that is listed under Projects on my computer.