Measured values can be accessed through the LHMI, WHMI or PCM600.
| Indicator | Description |
|---|---|
| IL1-A | Current measured on phase L1 |
| IL2-A | Current measured on phase L2 |
| IL3-A | Current measured on phase L3 |
| I 0-A | Measured earth-fault current |
| U 0-kV | Measured residual voltage |
| U12-kV | Measured phase-to-phase voltage U12 |
| U23-kV | Measured phase-to-phase voltage U23 |
| U31-kV | Measured phase-to-phase voltage U31 |
| f-Hz | Measured frequency |
| S-MVA | Total apparent power |
| P-MW | Total active power |
| Q-MVar | Total reactive power |
| PF | Average power factor |
| Ng-Seq-A | Negative-phase-sequence current |
| Ps-Seq-A | Positive-phase-sequence current |
| Zro-Seq-A | Zero-phase-sequence current |
| Ng-Seq-kV | Negative-phase-sequence voltage |
| Ps-Seq-kV | Positive-phase-sequence voltage |
| Zro-Seq-kV | Zero-phase-sequence voltage |