Glossary - Arc protection - Auto synchronization - Bay control and measurement - Merging unit - Transformer protection - 2 winding - Feeder protection - Voltage regulation - Capacitor bank protection - Petersen Coil control - Grid automation - Busbar differential protection (high impedance) - Back-up protection - Motor protection - Busbar protection (voltage and frequency) - Transformer protection - 3 winding - Interconnection protection - Generator protection - Power management/Load shedding - Modbus Communication Manual - REX640 Protection and control - PCL4 - IEC - ANSI - 16.02.2023

REX640 Modbus Communication Protocol Manual

ACD Start/pickup status
ACT

1. Application configuration tool in PCM600

2. Trip status in IEC 61850

AI Analog input
ASCII American standard code for information interchange
Cnt Counter
CT Current transformer
DPC Double-point control
DPS Double-point status
EMC Electromagnetic compatibility
Ethernet A standard for connecting a family of frame-based computer networking technologies into a LAN.
HMI Human-machine interface
IEC International electrotechnical commission
IEC 61850 International standard for substation communication and modeling
INS/INC Integer status
IP Internet protocol
IP address A set of four numbers between 0 and 255, separated by periods. Each server connected to the Internet is assigned a unique IP address that specifies the location for the TCP/IP protocol.
LED Light-emitting diode
LSB Least significant bit
MCD Momentary change detect
MMS

1. Manufacturing message specification

2. Metering management system

Modbus A serial communication protocol developed by the Modicon company in 1979. Originally used for communication in PLCs and RTU devices.
Modbus ASCII Modbus link mode. Character length 10 bits.
Modbus memory map Allocation of accessible protocol data
Modbus RTU Modbus link mode. Character length 11 bits.
Modbus TCP/IP Modbus RTU protocol which uses TCP/IP and Ethernet to carry data between devices
MOM Momentary position
PCM600 Protection and control IED manager
PLC Programmable logic controller
PU Protection unit
RS-485 Serial link according to EIA standard RS485
RTC Real-time clock
RTU Remote terminal unit
Rx Receive/Received
SBO Select-before-operate
SCADA Supervision, control and data acquisition
SEC Security violation
SI Sensor input
SPA Strömberg protection acquisition. ABB proprietary serial client-server protocol used in substation automation for point-to-point communication.
SPC Single-point status of a controllable object
SPS Single-point status
SSR1 System status register for device health
SSR2 System status register for device mode
SSR3 System status register for data available 1
SSR4 System status register for data available 2
SSR5 System status register for device alive counter
SSR6 System status register for last command result
SSRx System status register
TCP Transmission control protocol
TCP/IP Transmission control protocol/Internet protocol
Tx Transmit/Transmitted
UD User-definable
UDB User-definable bit
UDR User-definable register
UID Unique ID
UTC Coordinated universal time
VT Voltage transformer