Terminal blocks of ring-lug type are used for electrical connections.
- Connect a suitable ring lug to the cable.
- Remove the contact screws from the connector, thread the ring-lug cable lug to the terminal screw and tighten the screw.
|
Connector type |
Wire size |
Ring-lug type |
Contact screw tightening torque |
Connector fixing screw tightening torque |
|
|---|---|---|---|---|---|
|
Stranded |
Crimp ferrule |
||||
|
CT/VT connectors |
2.62…6.64 mm² (AWG 12-10) |
- |
TE ring lug TE-35787 1 |
1.2. 1.5 Nm (0.8851…1.1063 ft-lb) |
1.2 Nm (0.8851 ft-lb) |
|
Signal connectors |
1.25…2 mm² (AWG 16-14) |
- |
TE ring lug TE-320561 1 |
1.13 Nm (0.8334 ft-lb) |
0.35 Nm (0.2581 ft-lb) |
1 Use the TE crimping tool TE-58433-3