Inserting an IED by importing a .apcmi file - Arc protection - Auto synchronization - Bay control and measurement - Merging unit - Transformer protection - 2 winding - Feeder protection - Voltage regulation - Capacitor bank protection - Petersen Coil control - Grid automation - Busbar differential protection (high impedance) - Back-up protection - Motor protection - Busbar protection (voltage and frequency) - Transformer protection - 3 winding - Interconnection protection - Generator protection - Power management/Load shedding - Engineering Manual - REX640 Protection and control - PCL6 - IEC - ANSI - 30.09.2025

REX640 Engineering Manual
  1. In the Plant Structure view, right-click the bay and select Import.
    Note: A .apcmi file can be imported only when the bay is selected in the plant structure.
    Figure 1. Importing IED configuration
  1. In the Import dialog box, select the .apcmi file to be imported and click Open.
    After importing, the IED object is created in the plant structure.
After the .apcmi file has been imported, the IP address, the name and the technical key of the physical IED have to be changed.