Setting up the indication timeout - Arc protection - Bay control and measurement - Merging unit - Transformer protection - 2 winding - Feeder protection - Voltage regulation - Capacitor bank protection - Grid automation - Busbar differential protection (high impedance) - Line differential protection - Back-up protection - Motor protection - Busbar protection (voltage and frequency) - Interconnection protection - Generator protection - Power management/Load shedding - Operation Manual - REX615 Protection and control - PCL2 - IEC - ANSI - 01.04.2026

REX615 Operation Manual
Table 1. Configuration options

Option

IEC61850 parameter

Behavior

HMI > Indication enable

LD0.LDEV1.IndEna.setVal

Can be used to disable all indications globally.

If disabled, hides Indication timeout parameter in menu.

Range: Enable/Disable

Default: Enable

HMI > Indication timeout

LD0.LDEV1.IndTms.setVal

Sets automatic indication timeout for events in seconds.

Setting the value to 0, will not expire indications automatically.

Range: 0 – 604800 (3600s = 1 hour, 86400s = 1 day, 604800s = 1 week)

Default: 0