Setting the system time and time synchronization - Arc protection - Bay control and measurement - Merging unit - Transformer protection - 2 winding - Feeder protection - Voltage regulation - Capacitor bank protection - Grid automation - Busbar differential protection (high impedance) - Line differential protection - Back-up protection - Motor protection - Busbar protection (voltage and frequency) - Interconnection protection - Generator protection - Power management/Load shedding - Operation Manual - REX615 Protection and control - PCL2 - IEC - ANSI - 18.04.2024

REX615 Operation Manual
  1. Select Main menu > Configuration > Time > System time.
  2. Select the parameter with or .
  3. Press , change the value with or and press again.
  4. Repeat steps 2 and 3 to set the rest of the system time parameters.
  5. Select Main menu > Configuration > Time > Synchronization > Synch source and press .
  6. Select the time synchronization source with or .
  7. Press to confirm the selection.