Setting communication protocol parameters - Arc protection - Bay control and measurement - Merging unit - Transformer protection - 2 winding - Feeder protection - Voltage regulation - Capacitor bank protection - Grid automation - Busbar differential protection (high impedance) - Line differential protection - Back-up protection - Motor protection - Busbar protection (voltage and frequency) - Interconnection protection - Generator protection - Power management/Load shedding - Operation Manual - REX615 Protection and control - PCL2 - IEC - ANSI - 16.05.2023

REX615 Operation Manual
  1. Select Main menu > Configuration > Communication > <protocol>.
  2. Change the protocol specific settings.
    Possible settings to be changed are, for example, the selected communication port, address and link mode.