Glossary - Arc protection - Bay control and measurement - Merging unit - Transformer protection - 2 winding - Feeder protection - Voltage regulation - Capacitor bank protection - Grid automation - Busbar differential protection (high impedance) - Line differential protection - Back-up protection - Motor protection - Busbar protection (voltage and frequency) - Interconnection protection - Generator protection - Power management/Load shedding - Operation Manual - REX615 Protection and control - PCL2 - IEC - ANSI - 18.04.2024

REX615 Operation Manual

100BASE-FX A physical medium defined in the IEEE 802.3 Ethernet standard for local area networks (LANs) that uses fiber optic cabling
100BASE-TX A physical medium defined in the IEEE 802.3 Ethernet standard for local area networks (LANs) that uses twisted-pair cabling category 5 or higher with RJ-45 connectors
615 series Series of numerical protection and control relays for protection and supervision applications of utility substations, and industrial switchgear and equipment
AC Alternating current
ACT

1. Application Configuration tool in PCM600

2. Trip status in IEC 61850

ANSI American National Standards Institute
CAT 5 A twisted pair cable type designed for high signal integrity
COMTRADE Common format for transient data exchange for power systems. Defined by the IEEE Standard.
CPU Central processing unit
CSV Comma-separated values
CT Current transformer
DAN Doubly attached node
DC

1. Direct current

2. Disconnector

3. Double command

DHCP Dynamic Host Configuration Protocol
DNP3 A distributed network protocol originally developed by Westronic. The DNP3 Users Group has the ownership of the protocol and assumes responsibility for its evolution.
DPC Double-point control
DST Daylight-saving time
EEPROM Electrically erasable programmable read-only memory
EMC Electromagnetic compatibility
Ethernet A standard for connecting a family of frame-based computer networking technologies into a LAN
FB Function block
FIFO First in, first out
Firmware System software or hardware that has been written and stored in a device's memory that controls the device
FPGA Field-programmable gate array
FTP File transfer protocol
FTPS FTP Secure
GOOSE Generic Object-Oriented Substation Event
HMI Human-machine interface
HSR High-availability seamless redundancy
HTTPS Hypertext Transfer Protocol Secure
HW Hardware
IEC International Electrotechnical Commission
IEC 60870-5-103

1. Communication standard for protective equipment

2. A serial master/slave protocol for point-to-point communication

IEC 61850 International standard for substation communication and modeling
IEC 61850-8-1 A communication protocol based on the IEC 61850 standard series
IEC 61850-9-2 A communication protocol based on the IEC 61850 standard series
IEC 61850-9-2 LE Lite Edition of IEC 61850-9-2 offering process bus interface
IED Intelligent electronic device
IEEE 1686 Standard for Substation Intelligent Electronic Devices' (IEDs') Cyber Security Capabilities
IP address A set of four numbers between 0 and 255, separated by periods. Each server connected to the Internet is assigned a unique IP address that specifies the location for the TCP/IP protocol.
IRF

1. Internal fault

2. Internal relay fault

IRIG-B Inter-Range Instrumentation Group's time code format B
LAN Local area network
LC Connector type for glass fiber cable, IEC 61754-20
LCD Liquid crystal display
LCP Liquid crystal polymer
LCT Life cycle traceability
LE Light Edition
LED Light-emitting diode
LHMI Local human-machine interface
MAC Media access control
MMS

1. Manufacturing message specification

2. Metering management system

Modbus A serial communication protocol developed by the Modicon company in 1979. Originally used for communication in PLCs and RTU devices.
Modbus ASCII Modbus link mode. Character length 10 bits.
Modbus RTU Modbus link mode. Character length 11 bits.
Modbus TCP/IP Modbus RTU protocol which uses TCP/IP and Ethernet to carry data between devices
NCC Network control center
PA Polyamide
PBT Polybutylene terephthalate
PC

1. Personal computer

2. Polycarbonate

PCM600 Protection and Control IED Manager
PRP Parallel redundancy protocol
PTP Precision Time Protocol
R/L Remote/Local
RAM Random access memory
RJ-45 Galvanic connector type
RoHS Restriction of hazardous substances
ROM Read-only memory
RS-232 Serial interface standard
RS-485 Serial link according to EIA standard RS485
RSTP Rapid spanning tree protocol
RTC Real-time clock
SAN Single attached node
SCL XML-based substation description configuration language defined by IEC 61850
Single-line diagram Simplified notation for representing a three-phase power system. Instead of representing each of three phases with a separate line or terminal, only one conductor is represented.
SLD Single-line diagram
SMT Signal Matrix tool in PCM600
SMV Sampled measured values
SNTP Simple Network Time Protocol
ST Connector type for glass fiber cable
STP Shielded twisted-pair
SVG Scalable vector graphics
SW Software
TCP/IP Transmission Control Protocol/Internet Protocol
UTC Coordinated universal time
VT Voltage transformer
WAN Wide area network
WHMI Web human-machine interface
XRIO eXtended Relay Interface by OMICRON