Configuring analog inputs - Arc protection - Bay control and measurement - Merging unit - Transformer protection - 2 winding - Feeder protection - Voltage regulation - Capacitor bank protection - Grid automation - Busbar differential protection (high impedance) - Line differential protection - Back-up protection - Motor protection - Busbar protection (voltage and frequency) - Interconnection protection - Generator protection - Power management/Load shedding - Operation Manual - REX615 Protection and control - PCL2 - IEC - ANSI - 18.04.2024

REX615 Operation Manual
  1. Select Main Menu > Configuration > Analog inputs.
  2. Select the analog input to be configured with or .
  3. Press , change the value with or and press again.
    • For CTs, the secondary current and primary current need to be set to the correct values.
    • For VTs, the secondary voltage and primary voltage need to be set to the correct values.