Editing GOOSE control blocks in IEC 61850 Configuration - Arc protection - Bay control and measurement - Merging unit - Transformer protection - 2 winding - Feeder protection - Voltage regulation - Capacitor bank protection - Grid automation - Busbar differential protection (high impedance) - Line differential protection - Back-up protection - Motor protection - Busbar protection (voltage and frequency) - Interconnection protection - Generator protection - Power management/Load shedding - IEC 61850 Engineering Guide - REX615 Protection and control - Relion Protection and Control - PCL2 - IEC - ANSI

REX615 IEC 61850 Engineering Guide

To edit GOOSE control blocks, IEC 61850 configuration engineering mode must be enabled from options.

Figure 1. Enabling IEC 61850 configuration engineering mode
  1. To open IEC 61850 Configuration, right-click an IED and select IEC 61850 Configuration.
    Figure 2. Opening IEC 61850 Configuration
  2. On the toolbar, select GOOSE Communication from the drop-down menu.
    Figure 3. Editing GOOSE control blocks

    Use the Data Sets tab for editing data sets for GOOSE control blocks and the GOOSE Controls tab for editing GOOSE control blocks.