| Name | Type | Default | Description |
|---|---|---|---|
| I3P | SIGNAL | – | Three-phase currents |
| BLOCK | BOOLEAN | 0=False | Block input status |
| POSOPEN | BOOLEAN | 0=False | Signal for open position of apparatus from I/O |
| POSCLOSE | BOOLEAN | 0=False | Signal for close position of apparatus from I/O |
| OPEN_CB_EXE | BOOLEAN | 0=False | Signal for open command to coil |
| CLOSE_CB_EXE | BOOLEAN | 0=False | Signal for close command to coil |
| PRES_ALM_IN | BOOLEAN | 0=False | Binary pressure alarm input |
| PRES_LO_IN | BOOLEAN | 0=False | Binary pressure input for lockout indication |
| SPR_CHR_ST | BOOLEAN | 0=False | CB spring charging started input |
| SPR_CHR | BOOLEAN | 0=False | CB spring charged input |
| RST_IPOW | BOOLEAN | 0=False | Reset accumulation energy |
| RST_CB_WEAR | BOOLEAN | 0=False | Reset input for CB remaining life and operation counter |
| RST_TRV_T | BOOLEAN | 0=False | Reset input for CB closing and opening travel times |
| RST_SPR_T | BOOLEAN | 0=False | Reset input for the charging time of the CB spring |
| Name | Type | Description |
|---|---|---|
| TRV_T_OP_ALM | BOOLEAN | CB open travel time exceeded set value |
| TRV_T_CL_ALM | BOOLEAN | CB close travel time exceeded set value |
| SPR_CHR_ALM | BOOLEAN | Spring charging time has crossed the set value |
| OPR_ALM | BOOLEAN | Number of CB operations exceeds alarm limit |
| OPR_LO | BOOLEAN | Number of CB operations exceeds lockout limit |
| IPOW_ALM | BOOLEAN | Accumulated currents power (Iyt),exceeded alarm limit |
| IPOW_LO | BOOLEAN | Accumulated currents power (Iyt),exceeded lockout limit |
| CB_LIFE_ALM | BOOLEAN | Remaining life of CB exceeded alarm limit |
| MON_ALM | BOOLEAN | CB 'not operated for long time' alarm |
| PRES_ALM | BOOLEAN | Pressure below alarm level |
| PRES_LO | BOOLEAN | Pressure below lockout level |
| OPENPOS | BOOLEAN | CB is in open position |
| INVALIDPOS | BOOLEAN | CB is in invalid position (not positively open or closed) |
| CLOSEPOS | BOOLEAN | CB is in closed position |