Signals - Arc protection - Motor protection - Feeder protection - Back-up protection - Technical Manual - REX610 Protection and control - Relion Protection and Control - 1.2 - IEC - ANSI - 03.05.2023

Table 1. DEFLPDEF Input signals

Name	Type	Default	Description
I3P	SIGNAL	–	Three-phase currents
IRES	SIGNAL	–	Residual current
U3P	SIGNAL	–	Three-phase voltages
URES	SIGNAL	–	Residual voltage
BLOCK	BOOLEAN	0=False	Block signal for activating the blocking mode
ENA_MULT	BOOLEAN	0=False	Enable signal for current multiplier
RCA_CTL	BOOLEAN	0=False	Relay characteristic angle control

Table 2. DEFHPDEF Input signals

Name	Type	Default	Description
I3P	SIGNAL	–	Three-phase currents
IRES	SIGNAL	–	Residual current
U3P	SIGNAL	–	Three-phase voltages
URES	SIGNAL	–	Residual voltage
BLOCK	BOOLEAN	0=False	Block signal for activating the blocking mode
ENA_MULT	BOOLEAN	0=False	Enable signal for current multiplier
RCA_CTL	BOOLEAN	0=False	Relay characteristic angle control

Table 3. DEFLPDEF Output signals

Name	Type	Description
OPERATE	BOOLEAN	Operate
START	BOOLEAN	Start

Table 4. DEFHPDEF Output signals

Name	Type	Description
OPERATE	BOOLEAN	Operate
START	BOOLEAN	Start