Signals - Arc protection - Motor protection - Feeder protection - Back-up protection - Technical Manual - REX610 Protection and control - Relion Protection and Control - 1.2 - IEC - ANSI - 03.05.2023

REX610 Technical Manual

Table 1. DPHLPDOC Input signals
Name	Type	Default	Description
I3P	SIGNAL	–	Three-phase currents
U3P	SIGNAL	–	Three-phase voltages
BLOCK	BOOLEAN	0=False	Block signal for activating the blocking mode
ENA_MULT	BOOLEAN	0=False	Enable signal for current multiplier
NON_DIR	BOOLEAN	0=False	Forces protection to non-directional

Table 2. DPHHPDOC Input signals
Name	Type	Default	Description
I3P	SIGNAL	–	Three-phase currents
U3P	SIGNAL	–	Three-phase voltages
BLOCK	BOOLEAN	0=False	Block signal for activating the blocking mode
ENA_MULT	BOOLEAN	0=False	Enable signal for current multiplier
NON_DIR	BOOLEAN	0=False	Forces protection to non-directional

Table 3. DPHLPDOC Output signals
Name	Type	Description
OPERATE	BOOLEAN	Operate
START	BOOLEAN	Start

Table 4. DPHHPDOC Output signals
Name	Type	Description
OPERATE	BOOLEAN	Operate
START	BOOLEAN	Start