All available functions are listed in the table. All of them may not be applicable to all products.
Function |
IEC 61850 |
IEC 60617 |
IEC-ANSI |
---|---|---|---|
Protection |
|||
Three-phase non-directional overcurrent protection, low stage |
PHLPTOC |
3I> |
51P-1 |
Three-phase non-directional overcurrent protection, high stage |
PHHPTOC |
3I>> |
51P-2 |
Three-phase non-directional overcurrent protection, instantaneous stage |
PHIPTOC |
3I>>> |
50P |
Three-phase directional overcurrent protection, low stage |
DPHLPDOC |
3I> -> |
67P/51P-1 |
Three-phase directional overcurrent protection, high stage |
DPHHPDOC |
3I>> -> |
67P/51P-2 |
Non-directional earth-fault protection, low stage |
EFLPTOC |
Io> |
51G/51N-1 |
Non-directional earth-fault protection, high stage |
EFHPTOC |
Io>> |
51G/51N-2 |
Non-directional earth-fault protection, instantaneous stage |
EFIPTOC |
Io>>> |
50G/50N |
Directional earth-fault protection, low stage |
DEFLPDEF |
Io> -> |
67G/N-1 51G/N-1 |
Directional earth-fault protection, high stage |
DEFHPDEF |
Io>> -> |
67G/N-1 51G/N-2 |
Three-phase inrush detector |
INRPHAR |
3I2f> |
68HB |
Three-phase thermal protection for feeders, cables and distribution transformers |
T1PTTR |
3Ith>F |
49F |
Motor load jam protection | JAMPTOC | Ist> | 50TDJAM |
Loss of load supervision | LOFLPTUC | 3I< | 37 |
Phase reversal protection | PREVPTOC | I2>> | 46R |
Negative-sequence overcurrent protection for machines | MNSPTOC | I2>M | 46M |
Negative-sequence overcurrent protection |
NSPTOC |
I2>M |
46M |
Phase discontinuity / Single phasing protection for motor |
PDNSPTOC |
I2/I1> |
46PD |
Loss of phase, undercurrent |
PHPTUC |
3I< |
37 |
Three-phase undervoltage protection |
PHPTUV |
3U< |
27 |
Three-phase overvoltage protection |
PHPTOV |
3U> |
59 |
Residual overvoltage protection |
ROVPTOV |
Uo> |
59G/59N |
Negative-sequence overvoltage protection | NSPTOV | U2> | 59NS |
Positive-sequence undervoltage protection | PSPTUV | U1< | 27PS |
Thermal overload protection for motors | MPTTR | 3Ith>M | 49M |
Circuit breaker failure protection |
CCBRBRF |
3I>/Io>BF |
50BF |
Master trip |
TRPPTRC |
Master Trip |
94/86 |
Emergency start-up | ESMGAPC | ESTART | EST,62 |
Frequency protection | FRPFRQ | f>/f<,df/dt | 81 |
Arc protection | ARCSARC | ARC | AFD |
Motor start-up supervision | STTPMSU | Is2t n< | 49,66,48,50TDLR |
Multipurpose protection |
MAPGAPC |
MAP |
MAP |
Control |
|||
Circuit-breaker control |
CBXCBR |
I <-> O CB |
52 |
Disconnector position indication |
DCSXSWI |
I <-> O DC |
29DS |
Earthing switch position indication |
ESSXSWI |
I <-> O ES |
29GS |
Synchronism and energizing check | SECRSYN | SYNC | 25 |
Autoreclosing |
DARREC |
O -> I |
79 |
Condition monitoring and supervision |
|||
Trip circuit supervision |
TCSSCBR |
TCS |
TCM |
Fuse failure supervision |
SEQSPVC |
FUSEF |
VCM, 60 |
Runtime counter for machines and devices | MDSOPT | OPTS | OPTM |
Circuit-breaker condition monitoring |
SSCBR |
CBCM |
52CM |
Current circuit supervision |
CCSPVC |
MCS 3I |
CCM |
Measurement |
|||
Three-phase current measurement |
CMMXU |
3I |
IA, IB, IC |
Residual current measurement |
RESCMMXU |
Io |
IG |
Frequency measurement | FMMXU | f | f |
Sequence current measurement |
CSMSQI |
I1, I2, I0 |
I1, I2, I0 |
Sequence voltage measurement | VSMSQI | U1, U2, U0 | V1, V2, V0 |
Three-phase power and energy measurement | PEMMXU | P, E | P, E |
Three-phase voltage measurement |
VMMXU |
3U |
VA, VB, VC |
Residual voltage measurement |
RESVMMXU |
Uo |
VG/VN |
Traditional LED indication |
|||
Programmable LED control |
LED |
LED |
LED |
Logging functions |
|||
Disturbance recorder (common functionality) |
RDRE |
DR |
DFR |
Disturbance recorder, analog channels 1…8 |
A1RADR |
A1RADR |
A1RADR |
Disturbance recorder, binary channels 1...32 |
B1RBDR |
B1RBDR |
B1RBDR |
Fault recorder |
FLTRFRC |
FAULTREC |
FR |
Communication protocols |
|||
IEC 61850-8-1 MMS |
MMSLPRT |
MMSLPRT |
MMSLPRT |
IEC 61850-8-1 GOOSE |
GSELPRT |
GSELPRT |
GSELPRT |
Modbus protocol |
MBSLPRT |
MBSLPRT |
MBSLPRT |