All other outputs can be used for signaling on start and tripping of the protection relay. On delivery from the factory, the start and alarm signals from all the protection stages are routed to signaling outputs.
Table 1. Output contacts X100:10-14
| Terminal |
Description |
|
X100:10
|
SO1, common
|
|
X100:11
|
SO1, NC
|
|
X100:12
|
SO1, NO
|
|
X100:13
|
SO2, NO
|
|
X100:14
|
SO2, NO
|
Output contacts of slot X110 are alternatively included in configuration A, and mandatorily included in configuration B.
Table 2. Output contacts X110:14-24
| Terminal |
Description |
| X110:14 |
SO1, common |
| X110:15 |
SO1, NO |
| X110:16 |
SO1, NC |
| X110:17 |
SO2, common |
| X110:18 |
SO2, NO |
| X110:19 |
SO2, NC |
| X110:20 |
SO3, common |
| X110:21 |
SO3, NO |
| X110:22 |
SO3, NC |
| X110:23 |
SO4, common |
| X110:24 |
SO4, NO |
Output contacts of slot X115 are available with configurations A and B.
Table 3. Output contacts X115:14-24
| Terminal |
Description |
| X115:14 |
SO1,common |
| X115:15 |
SO1,NO |
| X115:16 |
SO1,NC |
| X115:17 |
SO2,common |
| X115:18 |
SO2,common |
| X115:19 |
SO2,common |
| X115:20 |
SO3,common |
| X115:21 |
SO3,NO |
| X115:22 |
SO3,NC |
| X115:23 |
SO4,common |
| X115:24 |
SO4,NO |
Output contacts of X105 are optional for configurations A and B. One option is to use BIO0005 and the other one is to use BIO0007.
Table 4. Output contacts X105:14-24 (with optional BIO0005)
| Terminal |
Description |
| X105:14 |
SO1,common |
| X105:15 |
SO1,NO |
| X105:16 |
SO1,NC |
| X105:17 |
SO2,common |
| X105:18 |
SO2,NO |
| X105:19 |
SO2,NC |
| X105:20 |
SO3,common |
| X105:21 |
SO3,NO |
| X105:22 |
SO3,NC |
| X105:23 |
SO4,common |
| X105:24 |
SO4,NO |
Table 5. High-speed output contacts X105:15-24 (with optional BIO0007)
| Terminal |
Description |
| X105:15 |
HSO1,NO |
| X105:16 |
HSO1,NO |
| X105:19 |
HSO2,NO |
| X105:20 |
HSO2,NO |
| X105:23 |
HSO3,NO |
| X105:24 |
HSO3,NO |