Updating firmware or language - Grid automation - Engineering Manual - REC615 Grid Automation Protection and Control - RER615 Grid Automation Protection and Control - 2.0 - IEC - ANSI - 28.04.2023

REC615 and RER615 Engineering Manual
  1. Select the update mode.
    • Firmware
    • Language
  2. Select the update package and click Next.
    Figure 1. Choosing the update mode and package
    image/svg+xml
  3. Select the network interface controller, for example, the PC's integrated Ethernet communication card or an external Ethernet adapter, connected to the IED and click OK.
    Figure 2. Selecting the network interface controller
    image/svg+xml
  4. When updating remotely, wait for 30 seconds for the local user confirmation before proceeding with the update.
    • The local user can cancel the update via the LHMI by pressing during the 30 second window.
    • IED use is allowed after the update is completed successfully.
    Figure 3. Waiting for local user confirmation with remote update
    image/svg+xml
    Figure 4. Completing the update
    image/svg+xml