Safety information - Grid automation - Engineering Manual - REC615 Grid Automation Protection and Control - RER615 Grid Automation Protection and Control - Relion 615 series - 2.0 - IEC - ANSI - 28.04.2023

REC615 and RER615 Engineering Manual

DANGER: Dangerous voltages can occur on the connectors, even though the auxiliary voltage has been disconnected.
DANGER: Non-observance can result in death, personal injury or substantial property damage.
DANGER: Only a competent electrician is allowed to carry out the electrical installation.
DANGER: National and local electrical safety regulations must always be followed.
DANGER: The frame of the protection relay has to be carefully earthed.
DANGER: When the plug-in unit has been detached from the case, do not touch the inside of the case. The relay case internals may contain high voltage potential and touching these may cause personal injury.
CAUTION: The protection relay contains components which are sensitive to electrostatic discharge. Unnecessary touching of electronic components must therefore be avoided.
CAUTION: Whenever changes are made in the protection relay, measures should be taken to avoid inadvertent tripping.