Reengineering in the HMI event filtering tool - Grid automation - Engineering Manual - REC615 Grid Automation Protection and Control - RER615 Grid Automation Protection and Control - Relion 615 series - 2.0 - IEC - ANSI - 28.04.2023

REC615 and RER615 Engineering Manual
If HMI event filtering is used, the migrated event filter should for most part correspond to the configuration made in the old IED.
  1. Check the HMI event filter tree view and verify that the event filter corresponds to the old configuration.
  2. Add or remove the possible missing events in the migrated configuration by selecting or clearing the check box in the HMI event filtering tool.