The Ethernet configuration can be started using the shortcut menu in the plant structure or from the PCM600 main menu.
- In Plant Structure, select an IED.
-
Select Ethernet Configuration in one of the alternative ways.
- Right-click any IED in the PCM600 object tree and select Ethernet Configuration from the shortcut menu list.
- On the Tools menu, select Ethernet Configuration.
-
Use the tabs to configure the access points, merging unit and routers.
Table 1. Ethernet Configuration tabs Tab Description Access points This tab is used to configure access points. The access point tab shows the access points based on the supported hardware. For example, if the 100FX-ST/100FX-LC hardware modules are selected in hardware configuration, the corresponding access points will be available. Merging unit This tab is used to configure the merging unit. Merging unit’s availability is based on the 9-2 order options and the hardware module selection. For example, if OEM02 is selected, the corresponding 9-12 merging units will be available. Routers This tab is used to configure routers. -
Save the configuration data in one of the alternative ways.
- Click the Save button on the toolbar.
- On the File menu, select Save.
- Press CTRL+S.