The signal and channel values of a configuration can be continuously monitored in the online monitoring mode of Application Configuration. To online monitor the application configuration, the complete IED configuration must first be written to the IED.
On the toolbar, click the Work online button to start online monitoring.
When the IED does not support online monitoring, the button is disabled.
Note: Only when the application configuration in the IED and PCM600 are the same, the online monitoring starts.
On the toolbar, click the Watch window button.
Use the watch window to monitor certain signals in a separate window. A signal can be added to the watch window by right-clicking the function block signal in Application Configuration, and then selecting Add to watch window from the shortcut menu.
On the toolbar, click the Work Offline button to stop online monitoring.
Tip: The Work online function is not supported if the split window is enabled.