Inserting function blocks - Software products - Getting Started Guide - PCM600 Protection and Control IED Manager - 2.13 - IEC - ANSI - 29.06.2023

PCM600 Getting Started Guide
A function block can be inserted only in the configuration mode of Application Configuration.
  1. On the Insert menu, click FunctionBlock.
  2. Click in the Application Configuration window.
    The Insert Function Block dialog opens.
  3. Select the function block and click Insert.
  4. Enter the function block data and click Assign.
    If the automatic mode is selected for the execution order from the PCM600 toolbar, the cycle time, execution order and instance number are automatically assigned. Otherwise, set them manually before assigning.
    Tip: Function blocks can also be inserted in the drawing area by dragging, using the shortcut menu in Application Configuration, or by using the shortcut keys CTRL+SHIFT+F.