An exported parameter file contains all the IED functions which have parameters. In the import phase, the functions to be imported from the file can be defined.By default, both parameter values and visibilities are imported. If either parameter values or visibilities should not be imported, the check box under Import options must be cleared.
Parameters can be imported in an IED in any level of the Plant Structure as a whole or partially.
-
Select the node from the tree structure in Plant Structure to import the parameters.
To import all the parameters, select the IED node. To import the parameters related to a subnode, select the subnode by expanding the IED node.
-
Click the Import parameters toolbar button, or on the File menu select Import parameters.
-
Define the location of the import file.
The import file must be in .xrio or .csv format.
-
Click Open, and in the Open dialog box, select the functions containing the parameters required for importing.
All the functions are selected by default.
-
Click OK.
Note: If a revision mismatch occurs between the source function in the import file and the target function in the PCM600 tool, the function is displayed in red font and it is not selected. The function can be selected and imported but all parameters may not be updated in the target function.