Creating single-line diagrams - Software products - Getting Started Guide - PCM600 Protection and Control IED Manager - 2.13 - IEC - ANSI - 29.06.2023

PCM600 Getting Started Guide
  1. Add primary equipment to the display page by dragging from the Symbol Library.
    • Rotate the symbols with the Rotate left and Rotate right buttons on the toolbar.
    • Select the size in the Symbol Size box.
  2. Add junction symbols for connections.
  3. Connect the symbols where necessary.
    1. Point to the symbol's connection point.
    2. Drag the connection from the source connection port to the target connection port.
      A connection line between the source and target connection ports is drawn.
  4. Modify the symbol properties in the Object Properties window.
    1. Click an object in the Display Page.
    2. In the Object Properties window, modify the properties, such as, naming the symbol and placing the name.
  5. Relate dynamic symbols to their source data.
    1. Right-click the symbol and then click Select Input Signal.
    2. Select the signal from the list.
  6. Set the tab order of controllable objects in the Object Properties window.
    The tab order defines the order in which the controllable objects are selected when the Select button is pressed on the IED.
  7. Click the Save button on the toolbar to save the diagram.