Creating IEDs - Software products - Getting Started Guide - PCM600 Protection and Control IED Manager - 2.13 - IEC - ANSI - 29.06.2023

PCM600 Getting Started Guide
  1. Select and add the IED in one of the alternative ways.
    • On the View menu, click Object Types and select the IED from the Object Types window, and drag it under the bay in Plant Structure.
    • Right-click the bay in Plant Structure, and from the shortcut menu, point to New and select Create from template.
    • Right-click a bay object in Plant Structure, and on the shortcut menu, point to New and select the IED to be added.
  2. In the Configuration Wizard, select the configuration mode and click Next.
    • Select Online configuration when the IED is already connected to PCM600.
    • Select Offline Configuration when the IED is not available or is not connected to PCM600.
  3. Set up the IED following the steps in the Configuration Wizard.
    The available steps and settings depend on the IED.
    • Communication protocol
    • Port and IP address
    • IED version
    • Housing type
    • Display type
    • Order code
  4. Click Finish to confirm the configuration.