The ten LEDs on the side panel of the device indicate the status of the device. Only five of them are connected. The LEDs are numbered 1...10 starting from the rear panel side.
- 1
- Batt.
- 2
- Status
- 3
- Power/Error
- 4
- Function
- 5
- Eth 1
- 6
- Eth 2
- 7
- Led 1
- 8
- Led 2
- 9
- Led 3
- 10
- Led 4/Cellular
|
LED |
Label |
State |
Description |
|---|---|---|---|
|
1 |
Batt |
- |
LED unassigned |
|
2 |
Status |
On |
VPN connection is up |
|
Flashing |
VPN connection is starting |
||
|
Off |
VPN connection is disabled |
||
|
3 |
Power/Error |
On |
Operating power is turned on |
|
Off |
Operating power is turned off |
||
|
4 |
Function |
On |
Device is starting |
|
Flashing |
Device is operating normally |
||
|
Off |
Device is not operational |
||
|
5 |
Eth 1 |
On |
Ethernet link is up |
|
Flashing |
Ethernet link is transferring data |
||
|
Off |
Ethernet link down |
||
|
6 |
Eth 2 |
- |
LED reserved for future use |
|
7 |
Led 1 |
- |
LED reserved for future use |
|
8 |
Led 2 |
- |
LED reserved for future use |
|
9 |
Led 2 |
- |
LED reserved for future use |
|
10 |
Led 4/Cellular |
On |
This LED is controlled by the internal communication module logic. For more information, see Tools/Modem info on the Web HMI. |
|
Flashing |
This LED is controlled by the internal communication module logic. For more information, see Tools/Modem info on the Web HMI. |
||
|
Off |
Cellular connection is inactive |