The device has multiple configuration options that define routing.
|
Screen |
Parameter |
Value |
Description |
|---|---|---|---|
|
Ethernet WAN |
Gateway (IP address) |
(IP address) |
IP address of router used to reach the internet. If not used, the field should be empty. |
|
WAN Failover |
WAN Default Route |
Yes No |
Usually "Yes" if the default route is defined by "static routes". “No” is required if the selection logic is done on VPN level. |
|
On Demand |
Yes No |
"Yes" activates the backup interfaces only when required. "No" makes all the WAN interfaces available simultaneously, for example, for VPNs. |
|
|
Primary WAN Interface |
None Mobile WAN Ethernet WAN Ethernet WAN Secondary |
These three settings configure the high- level default gateways. They must be configured to enable default route. |
|
|
Backup WAN Interface |
None Mobile WAN Ethernet WAN |
||
|
Secondary Backup WAN Interface |
None Mobile WAN Ethernet WAN Ethernet WAN Secondary |
||
|
OpenVPN Client Settings |
Interface |
Any WAN Ethernet WAN Wireless WAN Ethernet LAN |
This setting defines which interface to use for connection. |
|
Routing mode |
None Host Net Default route |
This setting defines how the routing is configured with OpenVPN. See OpenVPN application note. |