- In the left pane, under Network, click WAN Failover.
- Set WAN Default Route to Yes.
This setting enables the use of the Ethernet WAN or the Mobile WAN as the default route interface.
- If configuring Ethernet WAN as the default gateway, in the left pane under Network, click Ethernet Port and set Port function to WAN.
If configuring Mobile WAN as the default gateway, skip this step.
- Set the default route.
- To select Ethernet WAN as the default gateway, under Primary WAN, set Interface to Ethernet WAN.
- To select Mobile WAN as the default gateway, under Primary WAN, set Interface to Mobile WAN.
- If both Ethernet WAN and Mobile WAN are configured, under Backup WAN, set Interface to Mobile WAN or Ethernet WAN, whichever is not selected as the default gateway.
If the primary WAN interface comes down, the device automatically switches the default route to the backup WAN interface.
- Click Submit to save the settings.
- Restart the device.