Wireless I/O Gateway ARR600 has two I/O variants called IO-1 and IO-2. IO-1 has 8 binary inputs and 2 binary outputs while IO-2 has 6 binary inputs, 4 binary outputs and 2 analog inputs.
ARR600 has two serial ports (RS-232, RS-485) and one LAN port (RJ-45) for device connectivity.
For communication to an upper-level system, ARR600 supports 4G (LTE) connectivity, but is also compatible with GPRS and 3G.
LED panel description
The LED panel of the device contains ten LEDs to indicate the complete operational status of the device.
|
1 |
Batt. |
|
2 |
Status |
|
3 |
Power/Error |
|
4 |
Function |
|
5 |
Eth 1 |
|
6 |
Eth 2 |
|
7 |
Led 1 |
|
8 |
Led 2 |
|
9 |
Led 3 |
|
10 |
Led 4/Cellular |
|
LED |
Label |
State |
Description |
|---|---|---|---|
|
1 |
Batt |
- |
LED unassigned |
|
2 |
Status |
On |
VPN connection is up |
|
Flashing |
VPN connection is starting |
||
|
Off |
VPN connection is disabled |
||
|
3 |
Power/Error |
On |
Operating power is turned on |
|
Off |
Operating power is turned off |
||
|
4 |
Function |
On |
Device is starting |
|
Flashing |
Device is operating normally |
||
|
Off |
Device is not operational |
||
|
5 |
Eth 1 |
On |
Ethernet link is up |
|
Flashing |
Ethernet link is transferring data |
||
|
Off |
Ethernet link down |
||
|
6 |
Eth 2 |
- |
LED reserved for future use |
|
7 |
Led 1 |
- |
LED reserved for future use |
|
8 |
Led 2 |
- |
LED reserved for future use |
|
9 |
Led 2 |
- |
LED reserved for future use |
|
10 |
Led 4/Cellular |
On |
This LED is controlled by the internal communication module logic. For more information, see Tools/Modem info on the Web HMI. |
|
Flashing |
This LED is controlled by the internal communication module logic. For more information, see Tools/Modem info on the Web HMI. |
||
|
Off |
Cellular connection is inactive |
Front panel
|
1 |
Power supply 12...48 VDC |
|
2 |
IO-1 digital I/O connector (only in certain product models) |
|
3 |
LAN/WAN port |
|
4 |
Console/application serial port |
|
5 |
Power switch |
|
6 |
Console/serial port switch |
|
7 |
DIP switches |
|
8 |
Application serial port |
|
1 |
Power supply 12...48 VDC |
|
2 |
IO-2 digital and analog I/O connector (only in certain product models) |
|
3 |
LAN/WAN port |
|
4 |
Console/application serial port |
|
5 |
Power switch |
|
6 |
Console/serial port switch |
|
7 |
DIP switches |
|
8 |
Application serial port |
Back panel