The system reboot enables rebooting a batch of Arctic devices. This is required for example after the firmware has been updated to take the new firmware version into use.
Select the Arctic devices to be managed.
Verify the Selected devices shown on the upper part of the pane.
On the left pane under the Arctic Patrol menu, select Management.
In the management actions list, verify that the correct devices are selected and select system reboot under API commands.
Click Run this action for all selected devices to reboot the devices.
Figure 1. Rebooting Arctic device
The Running and old batches list shows the started batch update. The Status column indicates how many of the total number of reboot tasks have been finished.
When all update tasks are finished, the duration of the batch update is shown in the Status column.
Figure 2. Running and old batches list for rebooting