RIO600 configurations are always maintained and stored within a PCM600 project. This requires that the RIO600 connectivity package is installed in PCM600. Every RIO600 device must have their own unique configuration within a PCM600 project.
RIO600 configurations have to be exported from PCM600 into a format supported by the ARM600 asset management actions. Normally the configuration is written directly to a RIO600 device using the Write to IED option in PCM600. Instead of writing to a RIO600 device, the operation can be overridden by enabling the export configuration in Write to IED option. When this is enabled for one or more RIO600 devices and the Write to IED command is executed, the configuration is exported to a zip file instead of being directly written to a RIO600 device. The exported zip file can be uploaded into ARM600’s Patrol WHMI for transfer as a batch to the RIO600 devices connected to the Arctic devices.