Arctic devices are able to scan their local networks for supported devices such as RIO600.
- Log in to the Arctic device as the arctic-adm user.
- To edit the Patrol connection in the Arctic device’s WHMI, click Services, select Arctic Patrol and click the pen and paper icon next to the Patrol connection.
- In the Allow LAN device SCAN drop-down list, select Yes to enable scanning for the supported devices.
Figure 1. Allowing LAN device scan - Click Submit.
- Reboot the device for the changes to take effect.Note: The Arctic device’s local network is scanned for new devices about twice per hour at the most. If a non-continuous Patrol connection is configured, the scanning is limited to the chosen connection interval. Only networks with a netmask of 255.255.255.* are scanned to avoid excessive scanning time.