A particular convention may not be used in this manual.
-
Abbreviations and acronyms are spelled out in the glossary. The glossary also contains definitions of important terms.
-
Push-button navigation in the LHMI menu structure is presented by using the push-button icons.
To navigate between the options, use
and
.
-
Menu paths are presented in bold.
Select .
-
LHMI messages are shown in Courier font.
To save the changes in nonvolatile memory, select Yes and press
.
-
Parameter names are shown in italics.
The function can be enabled and disabled with the Operation setting.
-
Parameter values are indicated with quotation marks.
The corresponding parameter values are "On" and "Off".
-
Input/output messages and monitored data names are shown in Courier font.
When the function starts, the START output is set to TRUE.
-
This document assumes that the parameter setting visibility is "Advanced".
- Values of quantities are expressed with a number and an SI unit. The corresponding imperial units may be given in parentheses.
- Protective earthing is indicated in figures with the symbol
.