The binary outputs can be configured either as pulse- or persistent-type outputs. Pulse-type outputs are triggered with the write value "1". Persistent-type outputs can be written with both values "1" and "0". The setting mode "toggled" for local operation corresponds to "persistent" for remote operation.
| IEC 61850 name | SA name | Description | Type |
|---|---|---|---|
| LD0.SPCGAPC3 | |||
| .SPCSO1.Oper.ctlVal | – | Output 1 control | On/Off |
| .SPCSO2.Oper.ctlVal | – | Output 2 control | On/Off |
| .SPCSO3.Oper.ctlVal | – | Output 3 control | On/Off |
| .SPCSO4.Oper.ctlVal | – | Output 4 control | On/Off |
| .SPCSO5.Oper.ctlVal | – | Output 5 control | On/Off |
| .SPCSO6.Oper.ctlVal | – | Output 6 control | On/Off |
| .SPCSO7.Oper.ctlVal | – | Output 7 control | On/Off |
| .SPCSO8.Oper.ctlVal | – | Output 8 control | On/Off |
| .SPCSO9.Oper.ctlVal | – | Output 9 control | On/Off |
| .SPCSO10.Oper.ctlVal | – | Output 10 control | On/Off |
| .SPCSO11.Oper.ctlVal | – | Output 11 control | On/Off |
| .SPCSO12.Oper.ctlVal | – | Output 12 control | On/Off |
| .SPCSO13.Oper.ctlVal | – | Output 13 control | On/Off |
| .SPCSO14.Oper.ctlVal | – | Output 14 control | On/Off |
| .SPCSO15.Oper.ctlVal | – | Output 15 control | On/Off |
| .SPCSO16.Oper.ctlVal | – | Output 16 control | On/Off |